Spicy Pickled Carrots

Ingredients

• 3 cup white vinegar
• 1 cup water
• 3/4 cup sugar
• 2 tbsp pickling salt or fine sea salt (not iodized)
• 3 lb small spring carrots, sliced on the diagonal 1/8 inch thick
• 1 medium red onion, sliced 1/8 inch thick
• 2 fresh jalapeños, sliced into rings 1/8 inch thick
• 2 tsp dried oregano, preferably Mexican, divided
• 2 tsp cumin seed, divided
• 2 large cloves garlic, halved

Instructions

1. Before starting the recipe, gather the needed equipment (see Tips).
2. Prepare four 1-pint (2-cup) canning jars and lids: wash in hot soapy water and rinse well. Place the rack in the pot and place the jars, right-side up, on the rack. Add enough water to fill and cover the jars by at least 1 inch. Cover the pot and bring to a boil; boil, covered, for 10 minutes, then turn off the heat. Keep the jars in the hot water (with the pot covered) while you prepare the recipe.
3. Meanwhile, place the new lids in a small saucepan, cover with water and bring to a gentle simmer. Very gently simmer for 10 minutes (taking care not to boil). Turn off the heat and keep the lids in the water until ready to use.
4. Combine vinegar, water, sugar and salt in a 6- to 8-quart nonreactive pot (see Tips) and bring to a boil. Stir until the sugar is dissolved. Add the carrots, onion and jalapeños; return to a boil. Remove from heat and let stand for 10 minutes.
5. Meanwhile, remove the sterilized jars from the water and place on a clean towel (if they're placed on a cold surface, the jars could crack). Place 1/2 teaspoon each oregano and cumin seed in each jar, along with half a garlic clove.
6. Fill the jars with the vegetables and pickling liquid to within 1/2 inch of the rim. Wipe the rims with a clean cloth. Use a lid wand (or tongs) to remove the lids from the hot water. Place lids and dry rings on the jars. Tighten until just finger-tight (won't move with gentle pressure) but don't overtighten.
7. To process the filled jars: Using a jar lifter, return the jars to the pot with the warm water, placing them on the rack without touching one another or the sides of the pot. If the water does not cover the jars by 1 to 2 inches, add boiling water as needed. Cover the pot and bring to a boil; boil for10 minutes, then turn off the heat, uncover the pot and leave the jars in the water for 5 minutes. Use the jar lifter to transfer the jars to a towel, with some space between each jar. Let stand, without moving, for 24 hours. (If you do not want to process the jars in a boiling-water bath, you can refrigerate the pickles for up to 2 months.)
8. After 24 hours, unscrew the rings and test the seals by pressing lightly on the center of each lid. They should have a slight concave indentation and neither yield to your pressure nor pop back. If a seal is not complete, you can process again in boiling water or store any unsealed jars in the refrigerator.